|
|
|
|
|
This software was checked for viruses 2 months ago and was found to contain no viruses.
Click here
to see antivirus report.
|
|
| |
|
Review
This is official description applies to version 3.1
PSoC Programmer is a flexible, integrated programming application for programming PSoC devices. PSoC Programmer can be used with PSoC Designer and PSoC Creator to program any design onto a PSoC device. PSoC Programmer supports all PSoC 1, 3, and 5 devices.
The following review written by one of the Software Informer contributors applies to version 3.0
PSoc Programmer as a free application, which allows you to program PSoC embedded system-on-chip devices developed by the Cypress Semiconductor Corporation.
After the device is set up, PSoc Programmer detects it automatically, and allows you to start working. The program has a simple interface with 3 viewing modes: classic, simple and modern. The simple view only allows loading the hex file and program. The classic and modern views allow you to select and configure the port, device, device's family, and show the actions/results. And the modern view allows you to set the programming parameters, characteristics, and view the status. The programming parameters you can set are: the programming mode, turn on/off verification and auto detection. Another important step to consider is loading the hex file into PSoC programmer before programming a device. Once the code is loaded to the device, it can be read. The flash can be erased by selecting a block ID or the entire flash content - to erase a block it must be unprotected. |
- It automatically detects the device that is connected. The program automatically installs “Bridge control panel” and “Clock programmer”.
|
- If a new version of PSoC programmer is launched and you have turned off the auto updater, it will show a warning message saying "it is expired".
|
|
Reviewed by: Roberto Jimenez Reviewer rating: Reviewed: 2 years ago
|
What's new in version 3.1
It offers the user a simple GUI that connects to programming hardware to program and configure PSoC, Clock, and configurable fixed function devices. Also provided with PSoC Programmer is the Bridge Control Panel, which can be used to debug, graph and log I2C serial communications using various supported Cypress Software. PSoC Programmer also provides a hardware layer for customers to design custom applications or use existing code examples for testing hardware and Firmware designs |
|
Report a wrong version
Report a wrong program title
Suggest a correction
|
Screenshots
All 5 screenshots |
|
